IceBarrel

Pre-Order
  • The IceBarrel is a cylindrical cold-therapy tub for people who prefer to sit upright. The seated position gives full submersion in a minimal footprint, and the closed shape adds a sense of seclusion for private sessions. Two sizes are available. The standard IceBarrel suits most users. The IceBarrel XL is recommended for anyone over 6'2" (187 cm), so you can submerge fully; it has a fiberglass insert instead of stainless steel.

    The Icetubs Engine™ cools the water without ice, holds the temperature, and can optionally heat the water for warm and contrast sessions. The tub arrives in two parts, tub and engine, which connect with the supplied connectors.

    IceBarrel Features

    • Seated full immersion: Built-in seat and upright design for a neck-to-shoulder plunge.
    • Precise temperature control: Set any temperature from 3°C to 38°C on the engine display or in the Icetubs app, with scheduling and Eco Mode.
    • Three-stage filtration: 5-micron filter and chemical-free ozone keep water clean, with a full water cycle every six minutes.
    • Premium materials: Heat-treated Thermowood for weather resistance, with 304 stainless steel. The XL uses a fiberglass insert.
    • Easy access: Includes a step on the engine cover. Upgrade to the optional stairs for extra support getting in and out.
    • No plumbing needed: Fill with a hose, plug into a grounded 220 V outlet and go. No ice, no drainage works.

    Options and accessories

    • Stairs, a three-step wooden accessory with safety railings that also protects the engine
    • Heater upgrade to warm the water up to 38°C
    • Drip tray (small size fits the IceBarrel)
    • Stainless steel phone holder for timing sessions or following breathing guides
    • AquaFinesse ice bath cleaner
    • Spare filter sets (6 or 12 pieces)

    Water care and filtration

    Every Icetubs Engine™ circulates and cleans the water every six minutes through a replaceable 5-micron filter and a chemical-free ozonator. The filters are ISO certified and capture particles smaller than a red blood cell (7 to 8 microns).

    With normal use the ozonator and filter keep the water fresh for up to one month, and many owners refresh the water roughly every one to two months. Avoid chlorine and salt-based products, which can damage the stainless steel. AquaFinesse, a cleaner made for ice baths, is available as an optional add-on.

    Setup, power and delivery

    • Setup takes about 5 to 15 minutes, excluding filling the tub
    • Filling takes about 30 minutes with a hose; the water then cools by roughly 3°C per hour depending on outside temperature
    • Draining and refilling takes about 10 minutes with a hose
    • Requires a grounded 220 V outlet. If unsure, consult a local electrician
    • Shipped on a pallet by a third-party carrier with tracking. Each barrel is handcrafted, so allow approximately 6 to 8 weeks
  • Cooling: As low as 3°C

    Heating: Up to 38°C (optional heater)

    Cooling engine: 1 HP / 3.17 kW (average)

    Energy use: Approx. 1.5 kWh per day; 1.07 kW average draw

    Max. power input / current: 1.7 kW / 7.5 A

    Power supply: 220 V ~ / 50 Hz, grounded three-prong outlet

    Refrigerant: R32

    Water pump flow: 55 L/min (advised flow 2 m³/h)

    Filtration: 1 × 5-micron filter plus ozone

    Controls: LED display, Wi-Fi, app, scheduling, Eco Mode

    Noise at 1 m: 60 dB(A)

    Ambient temperature: −5°C to 40°C with engine on; 1°C to 40°C with engine off

    Placement: Indoor and outdoor

    Capacity: 1 person

    Materials: Thermowood, 304 stainless steel (XL: fiberglass insert)

    Drainage valve: Yes (manual drain)

    Warranty: 2 years

    Weights include the cooling engine and engine protector. The IceBarrel is for home use. Stainless steel can be susceptible to rust near the sea or in salty environments.

  • The IceBarrel is a cylindrical cold-therapy tub for people who prefer to sit upright. The seated position gives full submersion in a minimal footprint, and the closed shape adds a sense of seclusion for private sessions. Two sizes are available. The standard IceBarrel suits most users. The IceBarrel XL is recommended for anyone over 6'2" (187 cm), so you can submerge fully; it has a fiberglass insert instead of stainless steel.

    The Icetubs Engine™ cools the water without ice, holds the temperature, and can optionally heat the water for warm and contrast sessions. The tub arrives in two parts, tub and engine, which connect with the supplied connectors.

    IceBarrel Features

    • Seated full immersion: Built-in seat and upright design for a neck-to-shoulder plunge.
    • Precise temperature control: Set any temperature from 3°C to 38°C on the engine display or in the Icetubs app, with scheduling and Eco Mode.
    • Three-stage filtration: 5-micron filter and chemical-free ozone keep water clean, with a full water cycle every six minutes.
    • Premium materials: Heat-treated Thermowood for weather resistance, with 304 stainless steel. The XL uses a fiberglass insert.
    • Easy access: Includes a step on the engine cover. Upgrade to the optional stairs for extra support getting in and out.
    • No plumbing needed: Fill with a hose, plug into a grounded 220 V outlet and go. No ice, no drainage works.

    Options and accessories

    • Stairs, a three-step wooden accessory with safety railings that also protects the engine
    • Heater upgrade to warm the water up to 38°C
    • Drip tray (small size fits the IceBarrel)
    • Stainless steel phone holder for timing sessions or following breathing guides
    • AquaFinesse ice bath cleaner
    • Spare filter sets (6 or 12 pieces)

    Water care and filtration

    Every Icetubs Engine™ circulates and cleans the water every six minutes through a replaceable 5-micron filter and a chemical-free ozonator. The filters are ISO certified and capture particles smaller than a red blood cell (7 to 8 microns).

    With normal use the ozonator and filter keep the water fresh for up to one month, and many owners refresh the water roughly every one to two months. Avoid chlorine and salt-based products, which can damage the stainless steel. AquaFinesse, a cleaner made for ice baths, is available as an optional add-on.

    Setup, power and delivery

    • Setup takes about 5 to 15 minutes, excluding filling the tub
    • Filling takes about 30 minutes with a hose; the water then cools by roughly 3°C per hour depending on outside temperature
    • Draining and refilling takes about 10 minutes with a hose
    • Requires a grounded 220 V outlet. If unsure, consult a local electrician
    • Shipped on a pallet by a third-party carrier with tracking. Each barrel is handcrafted, so allow approximately 6 to 8 weeks
  • Cooling: As low as 3°C

    Heating: Up to 38°C (optional heater)

    Cooling engine: 1 HP / 3.17 kW (average)

    Energy use: Approx. 1.5 kWh per day; 1.07 kW average draw

    Max. power input / current: 1.7 kW / 7.5 A

    Power supply: 220 V ~ / 50 Hz, grounded three-prong outlet

    Refrigerant: R32

    Water pump flow: 55 L/min (advised flow 2 m³/h)

    Filtration: 1 × 5-micron filter plus ozone

    Controls: LED display, Wi-Fi, app, scheduling, Eco Mode

    Noise at 1 m: 60 dB(A)

    Ambient temperature: −5°C to 40°C with engine on; 1°C to 40°C with engine off

    Placement: Indoor and outdoor

    Capacity: 1 person

    Materials: Thermowood, 304 stainless steel (XL: fiberglass insert)

    Drainage valve: Yes (manual drain)

    Warranty: 2 years

    Weights include the cooling engine and engine protector. The IceBarrel is for home use. Stainless steel can be susceptible to rust near the sea or in salty environments.