Nationwide Sales & Service - 01536 802333
The IceBath is built for full-body immersion. Its 60% back recline lets you lie back comfortably, and the low, bath-like entry makes it easy to get in and out for all body sizes. A spacious, reclined ice bath that you step into like a bath. Full-body immersion, precise cooling to 3°C and a Dutch-built finish in Thermowood and 304 stainless steel.Choose the standard IceBath or the IceBath XL. The XL is ideal for anyone over 6'2" (187 cm) and gives extra length, width and water volume.
No ice is needed. The Icetubs Engine™ cools and holds the water temperature, and an optional heater warms the water up to 38°C for warm therapy or contrast sessions. Temperature is set in the Icetubs app or on the engine panel.
Heater upgrade to warm the water up to 38°C
Drip tray (large size fits the IceBath)
Stainless steel phone holder
AquaFinesse ice bath cleaner
Spare filter sets (6 or 12 pieces)
Every Icetubs Engine™ circulates and cleans the water every six minutes through a replaceable 5-micron filter and a chemical-free ozonator. The filters are ISO certified and capture particles smaller than a red blood cell (7 to 8 microns).
With normal use the ozonator and filter keep the water fresh for up to one month, and many owners refresh the water roughly every one to two months. Avoid chlorine and salt-based products, which can damage the stainless steel. AquaFinesse, a cleaner made for ice baths, is available as an optional add-on.
Setup, power and delivery
The tub and engine arrive in two parts and connect with the supplied connectors; a step-by-step manual is included
Setup takes about 5 to 15 minutes, excluding filling
Filling takes 20 to 30 minutes with a hose; cooling is roughly 3°C per hour depending on the weather
Draining and refilling takes 10 to 15 minutes with a hose
Requires a grounded 220 V outlet
Shipped on a pallet by a third-party carrier with tracking
Cooling: As low as 3°C
Heating: Up to 38°C (optional heater)
Cooling engine: 1 HP / 3.17 kW (average)
Energy use: Approx. 1.5 kWh per day; 1.07 kW average draw
Max. power input / current: 1.7 kW / 7.5 A
Power supply: 220 V ~ / 50 Hz, grounded outlet
Refrigerant: R32
Water pump flow: 55 L/min (advised flow 2 m³/h)
Filtration: 1 × 5-micron filter plus ozone
Controls: LED display, Wi-Fi, app, scheduling, Eco Mode
Noise at 1 m: 60 dB(A)
Ambient temperature: −5°C to 40°C with engine on; 1°C to 40°C with engine off
Placement: Indoor and outdoor
Capacity: 1 person
Drainage valve: Yes (manual drain)
Warranty: 2 years
Weights include the cooling engine and engine protector. The IceBath is for home use; for commercial settings see the ProBath.
The IceBath is built for full-body immersion. Its 60% back recline lets you lie back comfortably, and the low, bath-like entry makes it easy to get in and out for all body sizes. A spacious, reclined ice bath that you step into like a bath. Full-body immersion, precise cooling to 3°C and a Dutch-built finish in Thermowood and 304 stainless steel.Choose the standard IceBath or the IceBath XL. The XL is ideal for anyone over 6'2" (187 cm) and gives extra length, width and water volume.
No ice is needed. The Icetubs Engine™ cools and holds the water temperature, and an optional heater warms the water up to 38°C for warm therapy or contrast sessions. Temperature is set in the Icetubs app or on the engine panel.
Heater upgrade to warm the water up to 38°C
Drip tray (large size fits the IceBath)
Stainless steel phone holder
AquaFinesse ice bath cleaner
Spare filter sets (6 or 12 pieces)
Every Icetubs Engine™ circulates and cleans the water every six minutes through a replaceable 5-micron filter and a chemical-free ozonator. The filters are ISO certified and capture particles smaller than a red blood cell (7 to 8 microns).
With normal use the ozonator and filter keep the water fresh for up to one month, and many owners refresh the water roughly every one to two months. Avoid chlorine and salt-based products, which can damage the stainless steel. AquaFinesse, a cleaner made for ice baths, is available as an optional add-on.
Setup, power and delivery
The tub and engine arrive in two parts and connect with the supplied connectors; a step-by-step manual is included
Setup takes about 5 to 15 minutes, excluding filling
Filling takes 20 to 30 minutes with a hose; cooling is roughly 3°C per hour depending on the weather
Draining and refilling takes 10 to 15 minutes with a hose
Requires a grounded 220 V outlet
Shipped on a pallet by a third-party carrier with tracking
Cooling: As low as 3°C
Heating: Up to 38°C (optional heater)
Cooling engine: 1 HP / 3.17 kW (average)
Energy use: Approx. 1.5 kWh per day; 1.07 kW average draw
Max. power input / current: 1.7 kW / 7.5 A
Power supply: 220 V ~ / 50 Hz, grounded outlet
Refrigerant: R32
Water pump flow: 55 L/min (advised flow 2 m³/h)
Filtration: 1 × 5-micron filter plus ozone
Controls: LED display, Wi-Fi, app, scheduling, Eco Mode
Noise at 1 m: 60 dB(A)
Ambient temperature: −5°C to 40°C with engine on; 1°C to 40°C with engine off
Placement: Indoor and outdoor
Capacity: 1 person
Drainage valve: Yes (manual drain)
Warranty: 2 years
Weights include the cooling engine and engine protector. The IceBath is for home use; for commercial settings see the ProBath.
